新聞資訊
網站首頁 > 新聞資訊 >

中控dcs卡件XP313生產過程中的組態修改

2022-10-14 14:46:47 來源:http://www.hotelfidalgo-goa.com/ 53

在生產過程中,因各種原因需要對DCS組態進行修改,以達到良好地監控效果,在修改過程中需對修改內容進行有效區分,下面浙大中控dcs卡件XP313廠家為您解說。
In the production process, the DCS configuration needs to be modified for various reasons to achieve good monitoring effect. In the modification process, the modified content needs to be effectively distinguished. The manufacturer of Zhejiang University's central control dcs card XP313 will explain.
1)僅增加或修改總貌(或流程圖、報表、趨勢頁、控制分組、數據一覽、用戶權限、二次計算、語音報警、操作小組、自定義鍵)、修改位號單位(或位號注釋)等操作,在完成上述操作后,進行全體編譯后傳送至各操作站并重載組態即可,無需進行下載工作。
1) Only add or modify the general view (or flow chart, report, trend page, control group, data list, user permission, secondary calculation, voice alarm, operation group, user-defined key), modify tag number unit (or tag number annotation) and other operations. After the above operations are completed, all operations can be compiled and transmitted to each operation station and the configuration can be reloaded, without downloading.
2)增加或刪除卡件、增加或刪、改位號或修改位號量程(或報警信息),則需要進行下載。
2) To add or delete cards, add or delete, change tag number or modify tag range (or alarm information), you need to download.
a)當使用SP243X、XP243、FW243L三款主控卡時,如工藝裝置處于生產狀態則不能進行下載工作,須在工藝裝置在停車狀態下進行下載,否則將對生產產生一定的影響;
a) When using SP243X, XP243 and FW243L master control cards, if the process unit is in production status, it cannot be downloaded. It must be downloaded when the process unit is in shutdown status, otherwise it will have a certain impact on production;
b)如使用XP243X、FW243X、FW247主控卡時,如對卡件、位號的修改不涉及控制程序,則可在工藝裝置處于生產狀態時進行下載工作;如涉及控制程序,則需將相關控制程序停用(如聯鎖取消、自動切為手動)后,方可進行下載工作。
b) If XP243X, FW243X and FW247 master control cards are used, if the modification of cards and tag numbers does not involve the control program, the process unit can be downloaded when it is in production status; If the control program is involved, the relevant control program shall be disabled (such as interlocking cancellation and automatic switching to manual) before downloading.
3)進行了控制程序的修改,則需要進行組態下載工作。
3) If the control program is modified, configuration downloading is required.
浙大中控dcs卡件XP313
a)當使用SP243X、XP243、FW243L三款主控卡時,如工藝裝置處于生產狀態則不能進行下載工作,須在工藝裝置在停車狀態下下載,否則將對生產產生一定的影響;
a) When using SP243X, XP243 and FW243L master control cards, if the process unit is in production status, it cannot be downloaded. It must be downloaded when the process unit is in shutdown status, otherwise it will have a certain impact on production;
b)如使用XP243X、FW243X、FW247主控卡時,則需將涉及該控制程序的所有控制程序停用(如聯鎖取消、自動切為手動)后,方可進行下載工作。
b) If XP243X, FW243X and FW247 master control cards are used, all control programs involving this control program must be disabled (such as interlocking cancellation and automatic switching to manual) before downloading.
4)對某控制站增加或減少了機籠,須在工藝裝置處于停車狀態下進行,嚴禁在工藝裝置處于生產狀態時進行組態修改、下載工作。重要一點,若在現有卡件地址中間或者在現有自定義位號中間增加,刪除內容,在線下載會引起大量數據不一致,應予避免杜絕。
4) The increase or decrease of cage in a control station must be carried out when the process unit is in shutdown state. It is strictly prohibited to modify or download the configuration when the process unit is in production state. It is important to note that if you add or delete content in the middle of the existing card address or in the middle of the existing user-defined tag number, online downloading will cause a lot of data inconsistency, which should be avoided.
中控dcs卡件XP313生產過程中的組態修改這一問題我們就講解到這里了,您對此有什么想法可以隨時來我們網站http://www.hotelfidalgo-goa.com咨詢查看!
This is the end of our discussion on the configuration modification of the central control dcs card XP313 in the production process. You can come to our website at any time if you have any ideas http://www.hotelfidalgo-goa.com Consult!
產品推薦
新聞推薦